Male Adaptors

Coupling

Clamp Saddles 1

Clamp Saddles 2

Clamp Saddles 3

Rotoframe Sprinkler

Mini Sprinkler

Floppy Sprinkler

Mist Sprinkler

Micro Sprinkler

Connectors-Line End-Male adaptor-Rubber grommets-Rubber Stoppers

End cap-Tankjoiner-Socket-Nipple-Offtake-Puncher

End plug-bush-female elbow-Tee-Hook-Clamp-Dripper-Locking Clamp

Venturi Injectors

Stakes (Spikes)

Accessories

 

Features and Specifications :

  • Revolutionary new concept sprinkler.
  • Manufactured from stable engineering plastic and silicon tubing.
  • Pops up with incoming water pressure and pushing the tubing out to start spraying action.
  • Pops down immediately as the water pressure is released.
  • No moving parts ,maintenance free
  • Economical
  • Large droplet size enables operation in windy condition .
  • Even with large droplet size no damage to soil structure as the droplet falls down with low energy .
  • Low evaporation and low wind drift losses
  • Silicone tube is protected against vandalism and possible damage due to birds.

Application :

  • Ideally suitable for irrigation of closely spaced crops like sugarcane ,vegetables ,oil seeds ,onions ,potato, wheat ,etc.
  • Suitable for landscape and turf irrigation.

Riser Technical specification :

  1. One sprinkler uses 730 liters per hour .The flow controller maintains the discharge within 5 % from 1.8 to 6 Bar .
  2. The recommended minimum pressure at sprinkler is 2 Bar .
  3. The gross precipitation for 11 x 13 m is 5 mm per hour , and for 12 x 14 m is 4.2 mm per hour .
  4. Filtration : A 500 micron screen filter is strongly recommended .